Double Acting High Tonnage With Flange High Pressure Hydraulic
Cylinder
Products details:
DALLAST high tonnage double acting hydraulic cylinders are designed
specifically for heavy lifting up to 1,000 tons
Integral stop ring provides piston blow-out protection
Double-acting for positive retraction
Baked enamel outside finish and plated pistons provide superior
corrosion resistance
Safety valve in retract side of cylinder helps to prevent damage in
case of accidental over-pressurization
Interchangeable, hardened grooved saddles are standard
Plunger wiper reduces contamination, extending cylinder life
| Model | Capacity (T) | Working Pressure (MPa) | Closed Height
(mm) | Outside Diameter (mm) | Oil Capacity (cm³) |
| KET-CLRG-502 | 50 | 70 | 166 | 130 | 385 |
| KET-CLRG-1002 | 100 | 70 | 664 | 165 | 664 |
| KET-CLRG-1502 | 150 | 70 | 993 | 205 | 993 |
| KET-CLRG-2002 | 200 | 70 | 1330 | 235 | 1330 |
| KET-CLRG-2502 | 250 | 70 | 1832 | 275 | 1832 |
| KET-CLRG-3002 | 300 | 70 | 2281 | 310 | 2281 |
| KET-CLRG-4002 | 400 | 70 | 2800 | 365 | 2800 |
| KET-CLRG-5002 | 500 | 70 | 3653 | 400 | 3653 |
| KET-CLRG-6002 | 600 | 70 | 4276 | 430 | 4276 |
| KET-CLRG-8002 | 800 | 70 | 5881 | 510 | 5881 |
| KET-CLRG-10002 | 1000 | 70 | 7392 | 560 | 7392 |
The benefits of DALLAST
1. There are over 120 kinds of hydraulic cylinder for you to
choose, including cylinder used for coalmine machinery, tippers,
engineering machinery and marine equipment. Every year many new
products are developed to meet customer's diversified requirement.
2. We own over 10 production line and 700 sets of prodution
equipment to satisfy customer's large demand in short delivery
time.
3. Strict quality control and assurance system from raw material to
finished products to guarantee high quality requirement.
4. National and international standard recognition
Exclusion clause:
1. This warranty does not cover & DALLAST shall have no
responsibility for:
2. Troubleshooting, diagnostic, removal, or reinstallation labor
charges;
3. Freight charges for either defective parts or new or repaired
parts unless prior written approval is obtained from DALLAST;
4. Corrosion unless the material is found to be out of
specification;
5. Failure due to contamination introduced to the cylinder;
6. Paint unless out of specification
FAQ
Q: How to make payment?
A: Once order confirmed, we will prepare proforma invoice with our
banking details.
Q: How long does it take to process orders?
A: It usually takes 15-20 business days to process most orders for
no stock, if stock available, only take10-15business days.
Q: What is the packing method?
A: Carton or According to Customer's Require
Q: How to ship?
A: Sea freight
Q: What is the warranty?
A: 12 months against B/L date.
