Garbage Truck Hydraulic RAM Single Acting Telescopic Cylinder
Introduction:
1. DALLAST single acting sleeve cylinders provide value through
proven reliability, efficient performance and the quality that you
expect from every DALLAST Cylinder Division product line.
2. The length of a hydraulic cylinder is the total of the stroke,
the thickness of the piston, the thickness of bottom and head and
the length of the connections. Often this length does not fit in
the machine.
Benefits:
• Every DALLAST single acting telescopic cylinder is individually
tested before leaving our plant to assure proper performance and
leak-free operation. All cylinder products carry an 12 months
warranty.
• Snap on glass filled bearings that absorb contaminants without
damaging cylinder walls.
• Nylon tipped set screws that conform to packing nut threads to
decrease the probability of packing
nuts backing off.
• Single-acting cylinders transfer force and motion in one
direction only.
| TG series hydraulic cylinder for vehicle |
| Mounting option | It has FC, FE, FEE. |
| Piston seal | (1). Low friction, high load piston seals with outboard wear bands are
standard.
(2). Loaded lip seals and cast iron rings are optional.
|
| specification | pressure (MPa) | bore size (mm) | mounting length (mm) | stroke length (mm) |
|
| 3TG-E150*800 | 16 | 150 | 140 | 800 |
| 3TG-E130*900 | 16 | 130 | 140 | 900 |
| 3TG-E110*1530 | 16 | 110 | 140 | 1530 |
| 3TG-E110*1350 | 16 | 110 | 140 | 1350 |
| 3TG-E110*1020 | 16 | 110 | 140 | 1020 |
| 3TG-E110*900 | 16 | 110 | 260 | 900 |
About piston rod:
High strength damage resistant piston rod provides 100,000 PSI
minimum yield material in 1" through 4 1/2" diameters. Larger
diameters vary between 50,000 and 75,000 PSI minimum yield
material. All rods are case hardened to 50-55 RC and hard chrome
plated to provide maximum wear life. Stainless steel is also
available. The hard chrome plated of the piston rod according to
your requirement.
Quality control:
1. Seiko secret agents, to ensure quality of the piston rod.
2. The product have to go through heat treatment - bore boring -
grinding - car processing - black nitriding and many other
processes.
3. The company accepted the Valet processing various types and
various sizes products, processing and processing more quotes,
welcome to consult.
After-sales service:
1. Various operation instructions such as: products inspect and
control ,Receiving inspection control ,sampling inspection
operation instruction, process quality inspection operation
instruction etc
2. Pre-sale service and free consultation service.
3. Quality control service includes pre-acceptance, departure
inspection, arrival inspection, PDI delivery inspection.
4. Guarantee period is subjected to warranty instruction (1 year/
2000 hours whichever comes first).
5. Free after-sale service during the warranty refers to problems
caused by quality issues; any non quality problem occurred, we will
charge the maintenance fee according to relevant standard.
6. Service Center all over the world for after sales problems.
