Dump Truck & Trailer Hydraulic Cylinder Single Acting Sleeve
Telescopic
A hydraulic cylinder consists of a piston sliding within a hollow
tube, moved by the pressure of a liquid. The piston, or rod is
usually machined.
| introduction | Truck front lifting cylinder is the dumper hydralic lifting system
for lifting actuator, truck compartment or tank. |
| application | It mainly used in various types of heavy truck front lifting, such
as 8*4 truck, semi-trailer, can be widely used in mining, iron and
steel, port conditions relatively poor use places can meet from13
tons to 90 tons lifting requirements.
|
| model | pressure (MPa) | extension / stage | the first stage bore diameter (mm) | stroke (mm) | diatance length (mm) | mount type |
| 4TG-E180*5390ZZ | 16 | 4 | 180 | 5390 | 425 | ZZ |
| 3TG-E180*3850ZZ | 16 | 3 | 180 | 3850 | 425 | ZZ |
| 4TG-E180*5390ZZ | 16 | 4 | 180 | 5390 | 325 | ZZ |
| 3TG-E150*3830ZZ | 16 | 3 | 150 | 3830 | 343 | ZZ |
| 3TG-E150*3360ZZ | 16 | 3 | 150 | 3360 | 343 | ZZ |
| 4TG-E150*4400ZZ | 16 | 4 | 150 | 4400 | 343 | ZZ |
| 4TG-E180*4595ZZ | 16 | 4 | 180 | 4595 | 343 | ZZ |
| 4TG-E180*5000ZZ | 16 | 4 | 180 | 5000 | 343 | ZZ |
| 5TG-E191*5780ZZ | 16 | 5 | 191 | 5780 | 343 | ZZ |
| 5TG-E191*6180ZZ | 16 | 5 | 191 | 6180 | 343 | ZZ |
| 5TG-E191*7130ZZ | 16 | 5 | 191 | 7130 | 343 | ZZ |
| 5TG-E191*7630ZZ | 16 | 5 | 191 | 7630 | 343 | ZZ |
| 5TG-E191*8130ZZ | 16 | 5 | 191 | 8130 | 343 | ZZ |
Features:
• Every DALLAST single acting telescopic cylinder is individually
tested before leaving our plant to assure proper performance and
leak-free operation. All cylinder products carry an 12 months
warranty.
• Snap on glass filled bearings that absorb contaminants without
damaging cylinder walls.
• Nylon tipped set screws that conform to packing nut threads to
decrease the probability of packing
nuts backing off.
• Single-acting cylinders transfer force and motion in one
direction only.
Mounting option:
It has FC, FE, FEE.
Piston Seals:
Low friction, high load piston seals with outboard wear bands are
standard. Loaded lip seals and cast iron rings are optional.
About piston rod:
High strength damage resistant piston rod provides 100,000 PSI
minimum yield material in 1" through 4 1/2" diameters. Larger
diameters vary between 50,000 and 75,000 PSI minimum yield
material. All rods are case hardened to 50-55 RC and hard chrome
plated to provide maximum wear life. Stainless steel is also
available. The hard chrome plated of the piston rod according to
your requirement.
Quality control:
1. Seiko secret agents, to ensure quality of the piston rod.
2. The product have to go through heat treatment - bore boring -
grinding - car processing - black nitriding and many other
processes.
3. The company accepted the Valet processing various types and
various sizes products, processing and processing more quotes,
welcome to consult.
Warranty:
We offer 12 months warranty.
The most common problems when selecting a hydraulic cylinder are as
follows:
A. Retract dimension
B. Stroke length (Inches)
C. Mounting types
D. Port Size and Type (SAE or NPT)
E. Pressure rating (PSI)
F. Bore Diameter (Inches)
G. Application details
After-sales service:
1. Various operation instructions such as: products inspect and
control ,Receiving inspection control ,sampling inspection
operation instruction, process quality inspection operation
instruction etc
2. Pre-sale service and free consultation service.
3. Quality control service includes pre-acceptance, departure
inspection, arrival inspection, PDI delivery inspection.
4. Guarantee period is subjected to warranty instruction (1 year/
2000 hours whichever comes first).
5. Free after-sale service during the warranty refers to problems
caused by quality issues; any non quality problem occurred, we will
charge the maintenance fee according to relevant standard.
6. Service Center all over the world for after sales problems.
