Hydraulic Dump Truck Front Lifting Cylinder Sleeve Telescopic
Introduction&Application:
1. Truck front lifting cylinder is the dumper hydralic lifting
system for lifting actuator, truck compartment or tank.
2. It mainly used in various types of heavy truck front lifting,
such as 8*4 truck, semi-trailer, can be widely used in mining, iron
and steel, port conditions relatively poor use places can meet
from13 tons to 90 tons lifting requirements.
Features:
• Every DALLAST single acting telescopic cylinder is individually
tested before leaving our plant to assure proper performance and
leak-free operation. All cylinder products carry an 12 months
warranty.
• Snap on glass filled bearings that absorb contaminants without
damaging cylinder walls.
• Nylon tipped set screws that conform to packing nut threads to
decrease the probability of packing
nuts backing off.
• Single-acting cylinders transfer force and motion in one
direction only.
Mounting option:
It has FC, FE, FEE.
Piston Seals:
Low friction, high load piston seals with outboard wear bands are
standard. Loaded lip seals and cast iron rings are optional.
About piston rod:
High strength damage resistant piston rod provides 100,000 PSI
minimum yield material in 1" through 4 1/2" diameters. Larger
diameters vary between 50,000 and 75,000 PSI minimum yield
material. All rods are case hardened to 50-55 RC and hard chrome
plated to provide maximum wear life. Stainless steel is also
available. The hard chrome plated of the piston rod according to
your requirement.
| model | pressure (MPa) | stroke (mm) | diatance length (mm) |
| 4TG-E180*5390ZZ | 16 | 5390 | 425 |
| 3TG-E180*3850ZZ | 16 | 3850 | 425 |
| 4TG-E180*5390ZZ | 16 | 5390 | 325 |
| 3TG-E150*3830ZZ | 16 | 3830 | 343 |
| 3TG-E150*3360ZZ | 16 | 3360 | 343 |
| 4TG-E150*4400ZZ | 16 | 4400 | 343 |
| 4TG-E180*4595ZZ | 16 | 4595 | 343 |
| 4TG-E180*5000ZZ | 16 | 5000 | 343 |
Quality control:
1. Seiko secret agents, to ensure quality of the piston rod.
2. The product have to go through heat treatment - bore boring -
grinding - car processing - black nitriding and many other
processes.
3. The company accepted the Valet processing various types and
various sizes products, processing and processing more quotes,
welcome to consult.
Warranty:
We offer 12 months warranty.
The most common problems when selecting a hydraulic cylinder are as
follows:
A. Retract dimension (Center of pin to center of pin)
B. Stroke length (Inches)
C. Mounting types
D. Port Size and Type (SAE or NPT)
E. Pressure rating (PSI)
F. Bore Diameter (Inches)
G. Application details
After-sales service:
1. Various operation instructions such as: products inspect and
control ,Receiving inspection control ,sampling inspection
operation instruction, process quality inspection operation
instruction etc
2. Pre-sale service and free consultation service.
3. Quality control service includes pre-acceptance, departure
inspection, arrival inspection, PDI delivery inspection.
4. Guarantee period is subjected to warranty instruction (1 year/
2000 hours whichever comes first).
5. Free after-sale service during the warranty refers to problems
caused by quality issues; any non quality problem occurred, we will
charge the maintenance fee according to relevant standard.
6. Service Center all over the world for after sales problems.
